Expert advice from Bob Vila, the most trusted name in home improvement, home remodeling, home repair, and DIY.

Bob's Bloggers

A community of bloggers who live and die to DIY

deck patio & porch, seasonal

DIY Tales: Converting a Deck to into a Screened-In Porch

By Country Design Home on Feb 26, 2014

Last year Coach and I converted our deck into a screened-in porch, which was absolutely awesome. No more buggy nights, or rainy afternoons when we couldn’t use the deck for anything other than furniture storage!

Since we had decorated it with quite a few pieces of antique wicker, I decided to “shrink-wrap” it to prevent any winter weather from ruining our newest addition. We used thin plastic sheeting and some lathing strips and tacked it up all the way around. Functional, not very pretty and it wasn’t very transparent, it flapped in the wind (which drove me crazy!) and the plastic kept ripping away from the lathing. Uggh. So this year I decided to get a more permanent wrap, something we could re-use each season. I went online to purchase a custom porch weather-proofing system, only to find the prices @ $1500.00 and up, to be a bit exhorbitant. Sooo, this past weekend’s project was weather-proofing the porch, country design home style! With this how-to video on You Tube as my guide, we began the laborious task of wrapping it up!

The supplies: 20 gauge clear vinyl (heavy enough to withstand the winds and rain, clear to let in the light) and 2″ white Duck Tape

Dritz 7/16″ steel grommets

5/16″ screw-eye hooks.

I measured each section, determining the placement for the grommets. Cut the vinyl, then wrapped the edges with the tape on both sides for extra stability, overlapping in the corners where the grommets will be installed.

Some sections had to be taped together, since the width of the vinyl is only 54″. That proved to be the most difficult part of this project, as the unrolled edges were a bit curled. You just have to smooth it as you go.

Mark the center holes for the grommets, cut out the circles and then hammer the grommet into place (this pounding away with a hammer activity is fun for anyone wanting to vent some anger or angst : ).

Hanging the large panels requires 2 people to make it level and install the screw-eyes.

The finished project : )

Hard, painstaking work, this easily took 20+ hours and we are still finishing up.The cost? All of the materials, with the exception of the screw-eyes ($5.19/50 @ Home Depot), were purchased at Joann’s using 60% coupons, of course! So the vinyl that normally would have been $7.99/yard became $3.20/yard and in total we will probably use 25 yards-so $80 + tax. The grommets, screws and tape totalled approximately $70, so the grand total (aside from the band-aids, the Motrin and a trip to the nail salon to repair that damage) comes to $150+ tax- one tenth of what the online estimate was! It wasn’t easy, but it looks great and now we will have another functional space for the holidays- as long as you wear your winter coat and mittens : ) And remember, always measure 3X..cut once!!

Susan

blog comments powered by Disqus